Saturday, January 19, 2008

Floor and Ceiling Water Damage Help

Finding mold or water damage in your bathroom is something that no homeowner wants to deal with, but the fact is that this happens more often than most people realize and that preventing it is much easier than dealing with the discovery later on after you have neglected this very important room of your home. If you are moving into a brand new house, then you are in luck, since there will probably be neither water damage nor mold in the bathroom when you get into it. You are ahead of the game. If you are moving into an old house or have lived in the same home for a number of years, then you might have some issues on your hands, but hopefully the room is not so far gone that you will have to renovate completely to take care of them.

The first thing that you need to look at in your bathroom is the floor. This is what holds up everything else in the room and if it gives way, it does not matter the quality of the craftsmanship in the rest of the room; everything in the room will end up on the ground under the house. So, if the flooring in your bathroom is old or damaged, then you should replace it. Before you put the new flooring down, though, you should take a look at the joists underneath to see if they are water damaged or rotting. If they feel weak in any way, you should find the money to repair it with, since building a new bathroom on top of weak joists makes no sense at all, because weak and rotted joists are what you are trying to prevent in the first place. You should also look for mold under the old flooring, as well, and remove any materials contaminated with it.

After you replace the flooring (if necessary) and put down the new flooring, you need to make sure that the entire floor is water tight to prevent rotting the joists later on. Much more water goes through the bathroom every day than you may realize, so think about this when waterproofing your floor. There should be no missing areas of grout or caulking anywhere in the room.

The next place you need to look is up. Does your ceiling sag at all or is it cracked in any places? Do you have a window in the bathroom or an exhaust vent? Or do you have neither? One of the most important things that you can install in the bathroom to protect it is an exhaust vent. Steam from your shower or bath is absorbed by the ceiling over time if it has nowhere to go, cause mold growth, and the drywall to sag. If enough water is absorbed by the ceiling over the years, it can crack and eventually collapse.