Finding mold or water damage in your bathroom is something that no homeowner wants to deal with, but the fact is that this happens more often than most people realize and that preventing it is much easier than dealing with the discovery later on after you have neglected this very important room of your home. If you are moving into a brand new house, then you are in luck, since there will probably be neither water damage nor mold in the bathroom when you get into it. You are ahead of the game. If you are moving into an old house or have lived in the same home for a number of years, then you might have some issues on your hands, but hopefully the room is not so far gone that you will have to renovate completely to take care of them.
The first thing that you need to look at in your bathroom is the floor. This is what holds up everything else in the room and if it gives way, it does not matter the quality of the craftsmanship in the rest of the room; everything in the room will end up on the ground under the house. So, if the flooring in your bathroom is old or damaged, then you should replace it. Before you put the new flooring down, though, you should take a look at the joists underneath to see if they are water damaged or rotting. If they feel weak in any way, you should find the money to repair it with, since building a new bathroom on top of weak joists makes no sense at all, because weak and rotted joists are what you are trying to prevent in the first place. You should also look for mold under the old flooring, as well, and remove any materials contaminated with it.
After you replace the flooring (if necessary) and put down the new flooring, you need to make sure that the entire floor is water tight to prevent rotting the joists later on. Much more water goes through the bathroom every day than you may realize, so think about this when waterproofing your floor. There should be no missing areas of grout or caulking anywhere in the room.
The next place you need to look is up. Does your ceiling sag at all or is it cracked in any places? Do you have a window in the bathroom or an exhaust vent? Or do you have neither? One of the most important things that you can install in the bathroom to protect it is an exhaust vent. Steam from your shower or bath is absorbed by the ceiling over time if it has nowhere to go, cause mold growth, and the drywall to sag. If enough water is absorbed by the ceiling over the years, it can crack and eventually collapse.
Showing posts with label damage. Show all posts
Showing posts with label damage. Show all posts
Saturday, January 19, 2008
Bathroom Water Damage and Mold Help
Nobody wants to find mold growing in the bathroom, but you will if you do not take the proper steps to make sure that it is taken care of on a regular basis. There are a number of things that you can do to stop mold from growing in your bathroom and since you will spend a large amount of time in this room over the years, it is suggested that you take these steps no matter what it might cost your wallet. The last thing you want is to need a mold remediation done in the bathroom that could cost you thousands of dollars simply because you did not take the time and effort to care for it.
One of the most important parts of your bathroom is not the tub, the toilet, or the sink, but the floor. This holds up everything else in the room and if this goes, the entire thing will fall to the ground underneath the house. This happens more often than you think and it is usually due to floors not being properly waterproofed. You can do this by making sure that there are no cracked tiles or cracked portions of linoleum or whatever flooring you have decided to have put down in the bathroom. If the flooring is old and you have not had it replaced since you have lived in the home and it is damaged, you will want to seriously consider having the floor checked out to see if it is water damaged. Mold can also start growing underneath it, so if the bathroom smells musty at all, you may want to have the house checked for this, too.
Another thing that you want to consider adding to the room is an exhaust vent. Exhaust vents are required by many local building codes and you may not really feel like you need it if you have a window, but installing one is a good investment since it is not always a good idea to leave the bathroom window open. The reason for these vents is so steam is not absorbed by the ceiling and upper walls and cause them to become molded over time. Ceilings that absorb water like this will also start to sag and possibly collapse later.
You should also keep an eye on the plumbing underneath the sink and near the toilet. You should not neglect the slow drips that can happen with these pipes and you should get them fixed as soon as possible, no matter how water tight your floor might be.
One of the most important parts of your bathroom is not the tub, the toilet, or the sink, but the floor. This holds up everything else in the room and if this goes, the entire thing will fall to the ground underneath the house. This happens more often than you think and it is usually due to floors not being properly waterproofed. You can do this by making sure that there are no cracked tiles or cracked portions of linoleum or whatever flooring you have decided to have put down in the bathroom. If the flooring is old and you have not had it replaced since you have lived in the home and it is damaged, you will want to seriously consider having the floor checked out to see if it is water damaged. Mold can also start growing underneath it, so if the bathroom smells musty at all, you may want to have the house checked for this, too.
Another thing that you want to consider adding to the room is an exhaust vent. Exhaust vents are required by many local building codes and you may not really feel like you need it if you have a window, but installing one is a good investment since it is not always a good idea to leave the bathroom window open. The reason for these vents is so steam is not absorbed by the ceiling and upper walls and cause them to become molded over time. Ceilings that absorb water like this will also start to sag and possibly collapse later.
You should also keep an eye on the plumbing underneath the sink and near the toilet. You should not neglect the slow drips that can happen with these pipes and you should get them fixed as soon as possible, no matter how water tight your floor might be.
Water Damaged Clothing Cleaning Methods
One of the most devastating things that can happen to a home owner is a house fire. And more often than not, you would have to either replace or attempt to restore fire or smoke damaged items. If you choose to simply clean the items, you must make sure that you clean them thoroughly before you make use of them again. While it may be quite a chore to try and restore most fire damaged items in the house, clothing is an almost entirely different story. Cleaning smoke damaged clothing is a very simple thing to do, and is most dependent on when you decide to wash them, and with what cleaning agent you employ to wash them.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
Venting Is A Good Thing To Keep Mold At Bay
If you do not have a ceiling exhaust fan installed in your bathrooms, it will not be long before you realize why you need one. There are so many reasons that they are a necessary item. Have you ever tried to blow dry your hair in a steamy bathroom? If you could see yourself in the mirror it might help, but with all that moisture in the air it’s not likely. Then there are also those unspeakable bathroom odors that almost anyone would rather not speak of, but they go along with the natural procession of things and the exhaust fan is a marvelous invention, if only to dispel an unpleasantness that remains even after its last occupant is gone!
A bad hair-do will be the least of your worries if the moisture problem is not corrected.
A consistently steamy bathroom can result in shrinking the edges of wallpaper and peeling paint. These minor complications are bad enough in themselves, but with prolonged exposure, it can actually cause wooden window frames to swell, preventing them from opening easily, or not at all. Other wood, such as door frames, crown molding, and baseboards can swell and be damaged also, and then there is the scary mold that can grow on the ceiling and walls. It can be much cheaper in the long run to install exhaust fans rather than wait around for more costly repairs to show up later. Rest assured, any unresolved water problems in a home will not result in any thing good.
The exhaust fan is something that is rarely overlooked in newer homes, but not so in older ones. If you are a do it yourselfer, this could be a project you can handle. However, it does involve some electrical wiring, cutting holes through your ceiling and possibly through your outer wall in the attic. Home improvement stores have them with or without lights. If there is any existing light fixture in the ceiling of your bathroom, it is an advantage. If not, it will be a little more involved. In any case, if you are not familiar with electrical wiring and reciprocating saws, then hiring someone to install it for you might be the easiest and safest option. Saving money doing it yourself is great if your work is done properly. Just remember it is only home improvement if you are fixing old problems and not creating new ones!
A bad hair-do will be the least of your worries if the moisture problem is not corrected.
A consistently steamy bathroom can result in shrinking the edges of wallpaper and peeling paint. These minor complications are bad enough in themselves, but with prolonged exposure, it can actually cause wooden window frames to swell, preventing them from opening easily, or not at all. Other wood, such as door frames, crown molding, and baseboards can swell and be damaged also, and then there is the scary mold that can grow on the ceiling and walls. It can be much cheaper in the long run to install exhaust fans rather than wait around for more costly repairs to show up later. Rest assured, any unresolved water problems in a home will not result in any thing good.
The exhaust fan is something that is rarely overlooked in newer homes, but not so in older ones. If you are a do it yourselfer, this could be a project you can handle. However, it does involve some electrical wiring, cutting holes through your ceiling and possibly through your outer wall in the attic. Home improvement stores have them with or without lights. If there is any existing light fixture in the ceiling of your bathroom, it is an advantage. If not, it will be a little more involved. In any case, if you are not familiar with electrical wiring and reciprocating saws, then hiring someone to install it for you might be the easiest and safest option. Saving money doing it yourself is great if your work is done properly. Just remember it is only home improvement if you are fixing old problems and not creating new ones!
Easy To Follow Tips To Waterproof Your Deck
One thing that always makes a homeowner proud is a newly finished deck. And for a few months it may look very good. However, if you have not had your deck waterproofed, your deck could end up being a very ugly addition to your home. If you want your deck to be around for a long time, then waterproofing it is absolutely essential. Without waterproofing, than cracking and warping can occur, and that means your deck will not be very far from destruction. Fortunately, waterproofing doesn’t have to be very difficult.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
Fire Damage Restoration Advice
One of the most devastating things can happen to a home owner is to have a house fire. And once the embers are finally smoldered out, the first thing one usually wants to do is to go into the charred remains to see just what are you home can be salvaged and cleaned. However, you should hold off on doing this until you have sought council from your insurance claims adjuster. This way, you can make sure that you do not waste your time, and money, and cause more damage as opposed to repairs. Your insurance adjuster can give guidance on how best to restore and/or replace your destroyed or damaged belongings.
One helpful thing that an insurance claims adjuster can do is refer you to a fire restoration company. Companies such as these can give very helpful tips to prevent further damage from being done to your home and property. Fire restoration companies can even tell you how to restore damaged properties. They will also give you an estimate of the likely price of thoroughly cleaning and deodorizing your home. Even though these services are, more often than not, expensive, it will most likely be a lot less than having to replace your damaged floors and furniture.
Now, if you find that you are incapable of affording the services a fire restoration company can offer, there are certain measures that you can take on your own. However, be sure that your fire marshal approves your plan and deems it safe enough for you to do before you go back into your home.
It is important that the very first thing you do to repair your home is to get as much air circulating through it as possible. The easiest way of doing this is to simply open some doors and open some windows and bring in a fan. If there has been any water damage, perhaps as a result of the fire trucks, you will probably want to invest in a de-humidifier. Any wet items should be dried as soon as possible. You might also want to consider buying a heavy duty vacuum cleaner. If you cannot afford cleaning services, do not use an upright vacuum or attachments because this would only set soot damage further in the carpet. After the vacuuming is done, you should cover the carpet with a tarp, so you do not cause further soiling while cleaning.
One helpful thing that an insurance claims adjuster can do is refer you to a fire restoration company. Companies such as these can give very helpful tips to prevent further damage from being done to your home and property. Fire restoration companies can even tell you how to restore damaged properties. They will also give you an estimate of the likely price of thoroughly cleaning and deodorizing your home. Even though these services are, more often than not, expensive, it will most likely be a lot less than having to replace your damaged floors and furniture.
Now, if you find that you are incapable of affording the services a fire restoration company can offer, there are certain measures that you can take on your own. However, be sure that your fire marshal approves your plan and deems it safe enough for you to do before you go back into your home.
It is important that the very first thing you do to repair your home is to get as much air circulating through it as possible. The easiest way of doing this is to simply open some doors and open some windows and bring in a fan. If there has been any water damage, perhaps as a result of the fire trucks, you will probably want to invest in a de-humidifier. Any wet items should be dried as soon as possible. You might also want to consider buying a heavy duty vacuum cleaner. If you cannot afford cleaning services, do not use an upright vacuum or attachments because this would only set soot damage further in the carpet. After the vacuuming is done, you should cover the carpet with a tarp, so you do not cause further soiling while cleaning.
Yes You Can Detect Mold With Light
There is almost nothing that plagues one’s house quite as badly as the pest called mold. Mold is usually very easy to find, because more often than not it is brightly colored and absolutely hideous. However, not all molds are as easy to detect. Some mold is actually very well hidden from the naked eye. There are a few types of molds, such as members of Penicillium sp. and Aspergillus sp. groups, which are capable of being next to invisible. However, it is not impossible to find these molds. In fact, you can use one of the simplest objects in your house to your advantage. A flashlight.
While it may sound simplistic enough to use a flashlight to find mold, there is a trick to it. Using the flashlight will not help you to detect the mold unless you shine it in the right way. You cannot simply shine the light directly on the surface where you suspect mold, because you will most likely see absolutely nothing. Instead, you must shine the light along the surface. Doing this will make the difference between getting rid of the mold or just using up battery power for nothing.
Mold is very tricky because it likes to hide in little areas that are difficult to get to without tools. One of these places is inside wooden paneling. Using the light along the paneling can show whether or not the paneling is buckled and in need of removal or replacement. There may be drywall or perhaps even a cavity behind the drywall because some people like to replace water damage drywall with paneling.
Moisture does not exactly mean that there is mold in the area, but this does not mean that you should neglect to look in areas where there is moisture. This is because it will help you realize that mold has the potential to grow in almost every single area in your home. It will also teach you that the mold can especially grow in the places you cannot see it. It is very much like the phrase “knowing is half of the battle.” In this case, knowing can make the difference between a house devoid of mold and a house infested with mold. If you do not know how to find mold, then you cannot combat it.
Do not just look for the black mold that you may constantly hear about. You should know that some black molds are merely cosmetic and if you don’t have the mold tested to confirm whether or not it is dangerous, you could end up wasting thousands of dollars.
While it may sound simplistic enough to use a flashlight to find mold, there is a trick to it. Using the flashlight will not help you to detect the mold unless you shine it in the right way. You cannot simply shine the light directly on the surface where you suspect mold, because you will most likely see absolutely nothing. Instead, you must shine the light along the surface. Doing this will make the difference between getting rid of the mold or just using up battery power for nothing.
Mold is very tricky because it likes to hide in little areas that are difficult to get to without tools. One of these places is inside wooden paneling. Using the light along the paneling can show whether or not the paneling is buckled and in need of removal or replacement. There may be drywall or perhaps even a cavity behind the drywall because some people like to replace water damage drywall with paneling.
Moisture does not exactly mean that there is mold in the area, but this does not mean that you should neglect to look in areas where there is moisture. This is because it will help you realize that mold has the potential to grow in almost every single area in your home. It will also teach you that the mold can especially grow in the places you cannot see it. It is very much like the phrase “knowing is half of the battle.” In this case, knowing can make the difference between a house devoid of mold and a house infested with mold. If you do not know how to find mold, then you cannot combat it.
Do not just look for the black mold that you may constantly hear about. You should know that some black molds are merely cosmetic and if you don’t have the mold tested to confirm whether or not it is dangerous, you could end up wasting thousands of dollars.
You Can Prevent Basement Mold Problems
It is a well known fact that old basements and mold damage go together like peanut butter and jelly. However, to new home owners it may not be as well known just how these damages are caused. And it may be even lesser well known how to combat the damage. Now, water damage, musty smells, and interior wall damage may be very obvious problems, but not all of the problems are as apparent. But they can indeed be removed.
Now, it is a very popular thing to employ your basement as a laundry room and it is usually a very efficient place to do this. However, you could be making your clothing a target for one of the biggest causes of home water damage: mold. Wet clothing is a veritable breeding ground for mold. If you throw in a basement, which is usually the most humid area you can find in a house, then the results could be disastrous. The reason is that mold likes to grow in places that are wet and humid. And if your basement does not have a good vent system, then humidity will build up from the machines running. This means that if the clothes are unattended for a certain period of time, you may find yourself buying some new clothes soon.
Now, while it can be difficult to prevent mold, it is not impossible. One way that you can prevent this from happening is to keep from blocking vents. This will allow for a better air flow and, as a result, the humidity will drop and keep your clothing safer. You should also make sure that any hot air with nowhere to go must be dealt with immediately. This heat has the potential to cause damage to any wood in the basement, and the damaged wood could create crevices for condensation to build up from humidity. This condensation and heat is almost guaranteed to start a mold colony. Installing an exhaust vent can be very beneficial to the remediation of this problem. It is also important that you keep doors that lead outside of your home closed as often as possible. This will help prevent more moisture from entering your house, and, therefore your basement. You can also invest in a dehumidifier. A dehumidifier and a good ventilation system should be a major help in keeping your basement mold free.
Now, it is a very popular thing to employ your basement as a laundry room and it is usually a very efficient place to do this. However, you could be making your clothing a target for one of the biggest causes of home water damage: mold. Wet clothing is a veritable breeding ground for mold. If you throw in a basement, which is usually the most humid area you can find in a house, then the results could be disastrous. The reason is that mold likes to grow in places that are wet and humid. And if your basement does not have a good vent system, then humidity will build up from the machines running. This means that if the clothes are unattended for a certain period of time, you may find yourself buying some new clothes soon.
Now, while it can be difficult to prevent mold, it is not impossible. One way that you can prevent this from happening is to keep from blocking vents. This will allow for a better air flow and, as a result, the humidity will drop and keep your clothing safer. You should also make sure that any hot air with nowhere to go must be dealt with immediately. This heat has the potential to cause damage to any wood in the basement, and the damaged wood could create crevices for condensation to build up from humidity. This condensation and heat is almost guaranteed to start a mold colony. Installing an exhaust vent can be very beneficial to the remediation of this problem. It is also important that you keep doors that lead outside of your home closed as often as possible. This will help prevent more moisture from entering your house, and, therefore your basement. You can also invest in a dehumidifier. A dehumidifier and a good ventilation system should be a major help in keeping your basement mold free.
Water Underneath Your Home
Unless your have a basement, not many people care much for venturing into that little door that leads underneath your home. The crawl space under there can vary from house to house. If you have ever had the pleasure of going in there, then you know how spooky it can be. It is usually very dark with lots of long ago vacated cobwebs and possibly some more recent occupied ones. It is also a great place for snakes to creep into, as well as mice and small animals.
You might not ever want to go under there, but an occasional look around into the dark depths with a flashlight might be a good thing. Not knowing what is going on under there can result in some bad consequences if left undetected.
If you happen to have central heating and air ductwork running underneath your home, any of the places it may have came loose can cause you to lose heating and cooling efficiency, in turn causing more strain on your unit and your wallet. Brackets holding the duct work off the ground could work loose or rust. It probably won’t happen, but you never know.
A more serious problem can occur if water leakage happens. This can be really bad if it is occurring around the foundation of your home. Over time, it can cause foundation failure. When this happens, the walls inside your home can become affected as well. If you find water under the house it needs to be addressed as soon as possible. Water damage in any form is never good.
Leaking pipes can cause water to puddle in spots under the house also. It does not sound too bad unless the leak happens to be wetting the floor joist. Eventually, it will cause rotting and molding to occur. This can lead to floor damage that can be costly and not easy to repair.
Outside water spigots are another thing you do not worry about until you start to use it and have problems. Usually the handle will start to slip and will not shut off completely. This is very easy to notice, but leaks can also develop in the piping behind the foundation walls where you can not see.
So, if you do go under your house just to have a look around, keep these few things in mind to check out while you are there. A little prevention really can go a long way towards saving time and money later on.
You might not ever want to go under there, but an occasional look around into the dark depths with a flashlight might be a good thing. Not knowing what is going on under there can result in some bad consequences if left undetected.
If you happen to have central heating and air ductwork running underneath your home, any of the places it may have came loose can cause you to lose heating and cooling efficiency, in turn causing more strain on your unit and your wallet. Brackets holding the duct work off the ground could work loose or rust. It probably won’t happen, but you never know.
A more serious problem can occur if water leakage happens. This can be really bad if it is occurring around the foundation of your home. Over time, it can cause foundation failure. When this happens, the walls inside your home can become affected as well. If you find water under the house it needs to be addressed as soon as possible. Water damage in any form is never good.
Leaking pipes can cause water to puddle in spots under the house also. It does not sound too bad unless the leak happens to be wetting the floor joist. Eventually, it will cause rotting and molding to occur. This can lead to floor damage that can be costly and not easy to repair.
Outside water spigots are another thing you do not worry about until you start to use it and have problems. Usually the handle will start to slip and will not shut off completely. This is very easy to notice, but leaks can also develop in the piping behind the foundation walls where you can not see.
So, if you do go under your house just to have a look around, keep these few things in mind to check out while you are there. A little prevention really can go a long way towards saving time and money later on.
Water Damage, Mold, and Mildew
One of the worst mistakes that a homeowner can make is ignoring the possibility of water damage to their home. While it may not seem like the steam in your bathroom from your showers or baths can do a lot of damage to the room, over time it can discolor the ceiling and eventually cause the drywall to sag down and possibly even collapse. You can imagine what kind of damage to the value of your home this can do and if you have purchased a home with water damage to the floors or ceiling, you know how much of a headache it can be to remodel it.
The answer to the steam problem is to install a simple exhaust vent in the ceiling over the tub or shower. This allows the steam to escape outside the room and the house and stops it from being absorbed by your ceiling drywall. You can often paint over the discoloration of the drywall after it has been damaged, but if the slab is sagging or cracked in the middle, it needs to be replaced as soon as possible. The last thing you want is for a loved one to be in the bath and the ceiling collapse on them.
Mold is also a threat to this and other moist rooms in the house. Mildew also tends to build up on tile and stone. Mildew and mold are close to the same thing, since they are both fungi, but mold tends to grow on more porous surfaces.
We have all heard horror stories of the bath tub or the toilet falling through the floor and unfortunately, most of the time this is due to the floor boards rotting. Too much water has soaked the floor over the years and has caused the boards to become flimsy. You can prevent this by making sure the floor of your bathroom is a hard, non-porous surface such as tile. The floor should be completely water tight and you may want to even install a drain on the bathroom floor, just to make sure the water goes where it is supposed to.
Even if you have a watertight floor, keeping the bathroom as dry as possible is a good idea. Always dry off the floor and other surfaces in the room after you get done with your shower. This helps lower the humidity in the room and ensures that the person who comes in the room after you does not slip and fall.
The answer to the steam problem is to install a simple exhaust vent in the ceiling over the tub or shower. This allows the steam to escape outside the room and the house and stops it from being absorbed by your ceiling drywall. You can often paint over the discoloration of the drywall after it has been damaged, but if the slab is sagging or cracked in the middle, it needs to be replaced as soon as possible. The last thing you want is for a loved one to be in the bath and the ceiling collapse on them.
Mold is also a threat to this and other moist rooms in the house. Mildew also tends to build up on tile and stone. Mildew and mold are close to the same thing, since they are both fungi, but mold tends to grow on more porous surfaces.
We have all heard horror stories of the bath tub or the toilet falling through the floor and unfortunately, most of the time this is due to the floor boards rotting. Too much water has soaked the floor over the years and has caused the boards to become flimsy. You can prevent this by making sure the floor of your bathroom is a hard, non-porous surface such as tile. The floor should be completely water tight and you may want to even install a drain on the bathroom floor, just to make sure the water goes where it is supposed to.
Even if you have a watertight floor, keeping the bathroom as dry as possible is a good idea. Always dry off the floor and other surfaces in the room after you get done with your shower. This helps lower the humidity in the room and ensures that the person who comes in the room after you does not slip and fall.
Exhaust Fans Help Prevent Bathroom Mold
If you live in an older home or are thinking about buying one, there may not be exhaust fans in the bathrooms. Installing them will probably be in your best interest for quit a few reasons. First of all they help to pull those smelly odors out of the room. Next they stop your mirrors from fogging up so much, but more importantly they go along way towards the prevention of mold growth. All that moisture will eventually lead to the black fuzzy looking stuff setting up housekeeping on your bathroom walls and ceiling. Excessive moisture can damage to your paint or wallpaper and woodwork as well. If left unresolved it can damage sheetrock and cause extensive repairs to have to be made. Mold growing anywhere can be unsightly and not a very healthy situation either.
Installing an exhaust fan now can be a fairly inexpensive solution when compared to the costly consequences of putting it off until later. You can get them at most home improvement stores. They can be purchased with or without lights. If you have a ceiling light fixture in your bathroom already, you can replace it with a fan/light combination. Or add just the fan in another location. Before you go down to pick one out, be sure to know the measurements of your bathroom so you are able to purchase one that will be strong enough for the size of your room. A sales person should be able to help you locate one with the right CFM {cubic feet per minute} That information can be found somewhere on the box..
If your going to attempt the installation yourself, take a good look at the tools you will need and all the necessary steps involved to be sure that you are up to the task. There are several things such as electrical wiring, installing the vent into the ceiling and out of the house through the attic. You might want to consider hiring someone to do it for you. Sometimes this is the best way to go if your not very skilled at do it yourself projects.
Whichever way you decide to go, it will be an inexpensive improvement that will help to dispel a number of things excessive bathroom moisture can cause. It will defiantly be worth the time and money now compared with what it could cost you least on.
Installing an exhaust fan now can be a fairly inexpensive solution when compared to the costly consequences of putting it off until later. You can get them at most home improvement stores. They can be purchased with or without lights. If you have a ceiling light fixture in your bathroom already, you can replace it with a fan/light combination. Or add just the fan in another location. Before you go down to pick one out, be sure to know the measurements of your bathroom so you are able to purchase one that will be strong enough for the size of your room. A sales person should be able to help you locate one with the right CFM {cubic feet per minute} That information can be found somewhere on the box..
If your going to attempt the installation yourself, take a good look at the tools you will need and all the necessary steps involved to be sure that you are up to the task. There are several things such as electrical wiring, installing the vent into the ceiling and out of the house through the attic. You might want to consider hiring someone to do it for you. Sometimes this is the best way to go if your not very skilled at do it yourself projects.
Whichever way you decide to go, it will be an inexpensive improvement that will help to dispel a number of things excessive bathroom moisture can cause. It will defiantly be worth the time and money now compared with what it could cost you least on.
Areas At Risk For Mold
If you own a home, then you have probably gone through your home looking for mold on at least one occasion and if you have not, then you really should think about doing this sometime soon. We have all heard about toxic mold on the news in one form or another and how harmful it can be to our health, but this is not the only issue with mold. Even if you manage to kill it, it can still cause allergic reactions in some people because the spores are still airborne and our bodies still recognize them as something they need to defend themselves against. Taking some antihistamine medication can help, but no one wants to take allergy medicine all the time if you really do not have to.
There are a number of signs that will show you that you should look for mold in different areas of your house, but you may not exactly know what you are supposed to be looking for. Go around your house and any room that is inherently moist should be scrutinized closely. Unless you have done a remodeling job recently and you have completely waterproofed the bathroom, then you should consider it as a possible breeding ground for mold. Other rooms that are inherently moist are the kitchen, laundry room, and the basement.
You should look for signs of moisture in the laundry room since it is likely to stay humid due to the amount of wet clothing and evaporating of water that stays in there all the time. Your dryer needs to be properly vented to the outside if it is not already, unless it is a ventless model. Always wash wet clothes as soon as possible and do not put dry clothes on top of them. You will most likely forget about them and they will mold after about 48 hours.
Your kitchen is another area that you should be concerned with. Areas around the sink and floor that are not waterproofed and even the ceiling should be suspect. The steam that comes off the stove when you cook damages the ceiling and can discolor it over time, so you should have an exhaust fan installed over the stove to help prevent this. These fans should also be put in other moist rooms of the house, especially the bathroom. This will keep you from having to repaint the ceiling as often as you would normally have to and even keep you from having to replace drywall.
mold, water, damage, restoration, sids, home, improvement, travel
There are a number of signs that will show you that you should look for mold in different areas of your house, but you may not exactly know what you are supposed to be looking for. Go around your house and any room that is inherently moist should be scrutinized closely. Unless you have done a remodeling job recently and you have completely waterproofed the bathroom, then you should consider it as a possible breeding ground for mold. Other rooms that are inherently moist are the kitchen, laundry room, and the basement.
You should look for signs of moisture in the laundry room since it is likely to stay humid due to the amount of wet clothing and evaporating of water that stays in there all the time. Your dryer needs to be properly vented to the outside if it is not already, unless it is a ventless model. Always wash wet clothes as soon as possible and do not put dry clothes on top of them. You will most likely forget about them and they will mold after about 48 hours.
Your kitchen is another area that you should be concerned with. Areas around the sink and floor that are not waterproofed and even the ceiling should be suspect. The steam that comes off the stove when you cook damages the ceiling and can discolor it over time, so you should have an exhaust fan installed over the stove to help prevent this. These fans should also be put in other moist rooms of the house, especially the bathroom. This will keep you from having to repaint the ceiling as often as you would normally have to and even keep you from having to replace drywall.
mold, water, damage, restoration, sids, home, improvement, travel
Subscribe to:
Posts (Atom)
